Sand machine knowledge

Description: Sand machine knowledge
Group News
12/12/2018  
The sand making machine is a common mechanical equipment in industrial production, and we usually use it to make machine sand. In the production process, in order to make the sand making machine work more efficiently and with higher performance, we should have an understanding of the structure and related principles of the sand making machine so that the machine can be operated and produced. Let's take a look at some of the relevant knowledge of the sand making machine.
Proficiency in the structural characteristics and working principle of the sand making machine equipment, correctly grasp the operation methods and techniques of the sand making machine equipment, and be able to carry out daily maintenance of the equipment, improve the production capacity of the sand making machine equipment, and ensure the long-term durability of the equipment. Important conditions. Here, let's take a look at the precautions for the operation of the sand making machine.
1. Before driving the sand making machine equipment, check the eddy chamber observations to ensure that they are in a tight state to prevent the materials from rushing out of the eddy chamber and then happening with the operation of the sand making machine. malfunction.
2. Check the direction of the impeller rotating wheel from the direction of the inlet. If the impeller does not rotate in a counterclockwise direction during the operation of the sand making machine, the motor wiring should be adjusted.
3. The granules fed to the sand making machine equipment shall be strictly in accordance with the specified requirements, and materials with a particle size larger than the specified requirements shall be prohibited from entering the equipment. Otherwise, it will cause imbalance of the impeller, resulting in serious wear of the impeller, and even blockage of the impeller passage, so that the sand making machine equipment can not work normally.
4. Pay attention to the start of the sand making machine equipment, in strict accordance with the correct order: line start discharge sanding machine feeding, and then ensure that the crusher starts without load, after the crusher is running normally, can feed production . The order of shutdown is exactly the opposite of the boot sequence.
5. When we stop the discharging device of the sand making machine, we should stop the feeding in time to avoid the consequences of the impeller being crushed or the motor burning. At the same time, we should pay attention to the regular shutdown of the sand making machine equipment, observe the internal wear condition of the sand making machine equipment, especially the wear degree of the center feeding pipe, the impeller, the cone cap, the circumferential guard plate and the wear block. Once these parts are found to be seriously worn, it is necessary to replace the maintenance in time to avoid affecting the smooth production of sand making operations.
In short, in order to ensure the long-term performance of the sand making machine equipment, we must pay attention to the various details of the operation of the equipment, in order to avoid the occurrence of production failures and improve the working efficiency of the sand making machine equipment.
Group Messages
There are no messages yet
Group Owner: crushermachine169
Group Type: Open
© 2014 WritingRoom.com, LLC. ALL RIGHTS RESERVED
WRITING | POETRY WRITING | CREATIVE WRITING | WRITE A BOOK | WRITING CONTESTS | WRITING TIPS